Inquiry Notes: Due to website reasons, the inquiry button below can not contact us. If you are interested in our products, please contact our customer manager. The contact information is as follows:
Name: Johnson Ma
Telephone: +86 18018953777
Fax: 86-(0411) -87613900
The 9W fluorescent tube is an elliptical fluorescent tube, which is cost-effective, brighter and more energy efficient. No UV, heavy metal and other harmful substances pollution, no stroboscopic, does not affect eyesight, no radiation, no noise, does not affect health. This kind of lamp belongs to high brightness section, the effect of light is very high, brighter than the ordinary LED fluorescent lamp. Foot power is not reported, good heat dissipation, long durable.
◎Using SMD2835 high brightness lamp beads, the luminous efficiency is up to 135lm/w, which is rarely seen in the market. It belongs to super bright chip.
◎A variety of color temperature selectable, warm yellow light, neutral light, Leng Baiguang and so on.
◎Built in constant current drive and equipped with containment to ensure safety in all directions so as to avoid electric shock.
◎1.5mm thick aluminum alloy profiles are stronger than ordinary thin aluminum alloy profiles, and are resistant to compression and impact.
◎The high light transmittance PC mask is used to refract even light without blinding.
◎It is equipped with traditional plug, T shaped plug and two ends of lamps.
|Color rendering index||Ra>80|
|Material||Aluminum + PC|
|Color temperature||3000K-7000K all available|
|Payment terms||By T.T, Western Union, L/C, etc|
Acrylic mask, soft and light transmittance, high temperature resistance. Super bright 2835 beads, more energy saving, built-in constant current drive power, voltage overload protection function. It is easy to install, strong and durable, no shadow and no distortion. After a period of time, the luminous flux will not decay any longer, and it will be durable. No stroboscopic, no dark area, uniform luminescence, protect eyesight.
If you used LED lamps before, turn the past down directly and turn our lamps and lanterns up. But to pay attention to voltage, our lamp voltage is wide voltage, generally can be covered.
If you used a fluorescent lamp before, you should first remove the starter and install the lamp.
Note: the power must be cut off before the lamp is installed. After unloading the starter, do not expose the metal base of the starter to avoid danger.
Widely used in indoor lighting, office lighting, home lighting, workshop lighting, shopping mall lighting, warehouse lighting and so on.